Why won’t you give a Volusia County price?

Because we do not have one that would be true. A rusted meter on the peninsula, a clean garage panel in Deltona, and a Federal Pacific panel in a DeLand sale are not the same job. The estimate is the price. This page is the map of other people’s averages.

Are Angi and HomeAdvisor independent?

Treat them as related publishers, not as two studies. Their installed ranges for a 200-amp panel are similar because they often track the same kind of project data. The useful fact is the width of the range, not a false precision to the dollar.

Does a new 200-amp panel mean the house has 200-amp service?

Only if the meter and the service entrance can carry it, and the utility has accepted the change. A panel swap and a service upgrade are different projects. We say which one you are looking at after we see the equipment.

Will Odin match the national average?

No. We will not quote the average, discount the average, or imply the average is our number. If a written estimate is far from these bands, the reason should be visible: utility work, corrosion, distance, or a repair the average does not include.

Panel Upgrade Cost in Volusia County

The short version

Angi says that in 2026 the national average to upgrade an electrical panel is $1,600, and that most homeowners pay between $1,200 and $2,000. HomeAdvisor’s page, reviewed the same day, puts a 100-amp to 200-amp upgrade at $750 to $2,000 before any new wiring for added circuits. Those are benchmarks. They are not a bid for a house in Port Orange, DeLand, or Palm Coast, and they are not an Odin Electric price.

Angi and HomeAdvisor are related brands. Two pages that move together are not two independent studies. Use them to see the shape of the job, then throw them out when the local scope shows up.

Angi’s 2026 installed ranges

This is the “panel plus installation” column from Angi’s 2026 article, not the price of a panel in a box. National. Not adjusted for Florida.

National installed panel ranges published by Angi for 2026. Not an Odin quote.
Service size	Angi, panel and install
100 amps	$800 – $1,500
150 amps	$1,300 – $1,600
200 amps	$1,300 – $2,000
300 amps	$1,800 – $3,500
400 amps	$2,000 – $4,000

The same Angi article lists add-ons that sit outside a straight swap: a subpanel around $400 to $1,750, and a meter box around $200 to $800. A meter that has to be replaced because the service is actually changing, or because salt has eaten it, is how a “200-amp panel” stops being the $1,300-to-$2,000 line.

What those numbers leave out here

Panel swap versus service upgrade. A new 200-amp panel does not deliver 200 amps if the meter and the service conductors are still 100 or 150. The utility has to accept that change.
Which utility. New Smyrna Beach has a municipal electric utility. Much of the coast is Florida Power & Light. DeLand is widely Duke Energy Florida. Deltona is split by address. The bill decides.
The permit. Each city on the service area pages has its own building department. Fee schedules change. We are not inventing a county-wide permit fee.
Salt. On the barrier island, from Ormond through Daytona to New Smyrna, the meter can, the mast, and the panel cover may already be the scope. A national average assumes they are not.
The brand on the door. Federal Pacific Stab-Lok and Zinsco equipment change the conversation. The CPSC closed its Stab-Lok investigation in 1983 without a safety determination and without a recall. Insurers still flag the panels. We identify what is installed. See the panel page for that record.
What you are adding. An EV charger, a generator, a pool heater, or a workshop is a second line. Qmerit’s 2026 guide puts a typical Level 2 home charger at $1,700 on average, most projects $749 to $2,500, and says a 200-amp service upgrade can add $1,500 to $3,000 on top.
Access and finish. A panel in a finished living-room wall costs more to open and close than a panel in an open garage.

100 amps, 200 amps, and the code floor

A 200-amp service is common in new Florida houses. It is not a universal legal minimum. For a long time the National Electrical Code has required at least 100 amps for a one-family dwelling’s service (NEC 230.79). The size a particular house needs is a load calculation. New Smyrna Beach and Edgewater both published, as of November 7, 2026, that they enforce the 8th Edition (2023) Florida Building Code and the 2020 National Electrical Code. Other cities should be asked. The office that issues the permit confirms the edition.

How to read two bids

If one number sits in Angi’s band and another is twice that, do not assume the higher one is greedy or the lower one is a bargain. Ask whether each bid includes the meter and service conductors, the permit, the utility coordination, drywall, and any new circuits. A low bid that stops at the breaker box is not the same product as a bid that changes the service.

Odin’s number, when you ask for it, will be a written estimate for the address. It will not be “we match Angi.” Warranty terms are not on this page because the owner has not approved them. They belong on the estimate when they exist.

Sources, retrieved November 7, 2026

Angi, “Cost To Upgrade Electrical Panel”
2026 national figures retrieved November 7, 2026. Average $1,600. Most homeowners $1,200 to $2,000. Installed ranges by amperage are in the table above.
HomeAdvisor, electrical panel upgrade cost
Page reviewed November 7, 2026. A 100-to-200-amp upgrade cited at $750 to $2,000 before new circuit wiring. The amperage table on that page lines up with Angi at $1,300 to $2,000 installed for 200 amps.
Qmerit, Level 2 home charger costs, 2026
Retrieved November 7, 2026. Average installation $1,700, most projects $749 to $2,500, and $1,500 to $3,000 added if the service goes to 200 amps.
CPSC, Federal Pacific Stab-Lok investigation
March 3, 1983 release, with a February 18, 2011 note. Closed without a safety determination. Not a recall notice.

How much does a panel upgrade cost in Volusia County?